Water Butts, Water Tanks and more
Home Water Butts Contact View Cart Checkout

Water Butts >  Water Tanks  >  Water Tank Accessories  >  Water Pumps  >  Submersible Water Pumps  >  Submersible Water Pump



Water Butts
Water Butts that are ideal for gardens all great and small. Including rainwater harvesting systems for garden use and domestic use.

Ecosure water butts
UK made quality water butts.

Rainwater Tanks

Water butt shop

Gardening products such as water butts and garden planters also rainwater harvesting systems.

Water Butt

Garden Water Butts
For all your garden needs and garden products including water butts and garden furniture go to

Water Pumps

Water Tanks

Water Storage Tanks
UK made water storage tanks

Water Butts

Water Butts


dog baths


water pumps


water butts reviews

Mary Saunders - Nottingham

"I Needed a large slimline water butt to replace two big large ones, excellent service."

Matthew Alder - Cambridge

"I wanted a Water Butt on my new shed and found exactly what I wanted. Thank you"

David Horlock - Southport

"Great selection of Water Butts. I needed a Water Butt for my garden"

Derek Leigh - Poole

"We were looking for a slim but large Water Butt for the side of our house and Water Butts had a good range of sized Water Butts. Will buy again!"



water tank accessories

Submersible Water Pump

Hydroforce Submersible Water Pump


Hydroforce Submersible Water Pump Ref: Hydroforce

The HydroForce
™ Series 3 is an electronically-controlled,
pressure-sensitive, submersible, centrifugal roto-dynamic
pump with no reciprocating parts.
• Pressure-sensitive (demand) pump which turns itself off until
there is a demand for water.
• Max head (nominal) 35 metres, pump pressure (nominal) at
outlet 3.5 bar, max suction 3 metres.
• Dry-run Protection: when no water is detected for 8 seconds,
the pump is turned off by the printed circuit board (PCB)
in order to protect the motor and pump from burning out.
Automatic reset after a period of 30 minutes. If water is still
not detected, subsequent reset periods are 1.5 hours, 3
hours, 7 hours, 12 hours, 24 hours then back to the beginning
of the cycle. Additionally, a thermal switch, not connected to
the PCB, turns the pump off when motor overheats. It resets
when cool which make take several hours. • NEW: Alloy bulkhead (pictured below), pressure release gap
and twin chamber design prevents ingress of water to motor,
electrical components and to bearing oil.
• NEW: Double bearing seal prevents egress of bearing oil.
• NEW: Alloy bulkhead dissipates motor heat to water in
the second chamber.
• NEW: Logic processors in PCB prevent other pump anomalies
and permit factory programming of reset timings.
• NEW: Inlet cartridge filter, inlet strainer and output pipe
connector are factory-fitted and the seals tested to ensure
proper running of the pump.
• Guaranteed for 2 years.
• Electricity consumption 800 watts at 220-240 Volts AC 50
Hz (requires 10 or 13 amp fuse and RCD mains socket).
Connection cable 10m H07RN-F.
• Inlet port to the non-removable filter 1 inch (25mm) female
BSP. Output port 1 inch (25mm) female BSP provided with
push-fit connector for 1 inch (25mm) MDPE pipe (11/4 inch
(32mm) connector option by special order).
• Dimensions L 565 W 185 H 260 mm, weight 13.1 kgs. 

Product Description

excl. VAT

inc. VAT

Ref: Hydroforce - Hydroforce Submersible Water Pump

water butts contact


UK Manufacturer

Nationwide Delivery

save money

Save money on
water bills

You can save money of your water bills by collecting your rainwater to use the garden.

You can collect rainwater from the smallest of roofs including green house roofs and shed roofs.

Did you know?
You can run a pressure washer from a water butt?

We deliver nationwide!

fish tanks and garden ponds

Garden Planters



rainwater harvesting
Rainwater Harvesting


water butts

watering cans

water butt accessories



water butts


Contact Us
Water Butts
Unit 1
Whiting Way

Tel: 01763 261781

FacebookTwitterWordpressYoutube Secure paymentsPaypal